Pressure control

Descriptions:

1. Stop and start the pump automatically
2. Stop the pump in the case of water shortage
3. After power cut off, restart the pump automatically when the power on
4. Forced start
5. Automatically restart after water shortage, the restart interval time is 1 hour recycle
6. Anti-stick protection, the controller will start the pump automatically by 1time in 48 hours to prevent the pump get stuck in the condition of long time no use.
7. Built-in pressure and current sensors, along with a digital screen, enable real-time monitoring of system pressure values and pump operating current.
8. Features a pressure sensor fault warning function
9. Features an alarm function to detect continuous operation of the water pump exceeding 6 hours without shutdown
10. Equipped with pump overload protection function
11. It features a warning function for detecting frequent start-stop cycles of the water pump.
12. Water shortage detection can be achieved by setting the water shortage pressure value and the dry running current value of the water pump
13. Under pressure mode, the delay time values for pressure shutdown and water shortage shutdown can be set.
14. The displayed pressure bar and psi units can be switched
15. Built in 2 working modes:
a. Pressure Mode: In this mode, the start and stop pressure values can be set. The pump stops when the pressure exceeds the stop pressure and starts when the pressure falls below the start pressure, offering simple operation.
b. Water tower mode, combined with mechanical float switch, when the water tower is full, turm off the water pump. When the set interval start time is reached, start the water pump. The interval start time can be selected from 1h, 3h, 6h, 12h, and 24h
16. Threaded interface: default G1/4 "rotative internal thread
17. Can be configured according to user requirements

OPTIONS:

1. Color
2. Threaded interface
3. Brand of pressure sensor
4. Power cable length