1.Stop and start the pump automatically
2.Stop the pump in the case of water shortage
3.After power cut off, restart the pump automatically when the power on
4.Manual forced start
5.Automatically restart after water shortage, the restart interval time is 1minute,30 minutes, 1 hour recycle
6.Built-in sensata pressure sensor
7.Built-in two working mode:
a.Automatic mode: The control adjust the starting pressure according to the pressure in the pipe and real-time monitoring. The higher the pipe pressure, the higher the start pressure, the lower the pipe pressure, the lower the start pressure, No need manual set, with this function, can avoid the problem occur because of wrong set of start pressure, such as the start pressure set not match with the pump lift will make the pump not start normally.
It can be used for the pumps that the head between 10m-98m, confirm to rated voltage, current, and power, especially applied to multiple pressure mixed superimposed systems (such as tap water pressure or other booster pumps, etc).Compare with the traditional pressure controller, it can reduce the occurrence of failure, thus reducing after-sales cost and more intelligent.
b.Normal mode: manually set starting pressure, 0.5-3.5bar adjustable, wide range of adjustment, easy to operate.
8.Joint screw: G1" male
9.It can be configured according to customers' needs.
1. Color
2. G1"plastic pipe joint for a quick connection to water pump.
3. Power cable length
.JPG)
